Stamped Concrete
All Services

Stamped Concrete

Patterned and coloured concrete — patios, walks, porches and drives

Free EstimateKnoxville & East Tennessee · Mon – Fri

Stamped concrete gives you the look of cut stone, slate, brick or plank for a fraction of what laying the real thing costs, in one continuous slab with no joints for weeds to grow through and nothing to settle or come loose. We stamp patios, front walks, porches, pool surrounds and driveways, usually in an ashlar slate or seamless stone pattern, with colour worked in two ways: an integral colour through the mix and a release powder that shadows the texture so the surface reads as stone rather than as tinted concrete. The whole job lives or dies on timing again — the mats have to go down in the narrow window when the slab will hold an impression but will not take a footprint, and the crew has to keep moving across it in order. Once it is cured we wash off the loose release, then seal it, which is what makes the colour come up. Plan on resealing every two to three years; on a south-facing Knoxville patio, closer to two.

Our Process

1

Choose Pattern and Colour

You pick the mat pattern and the colour from real samples, not a screen. We will also tell you which combinations hide wear and which show every mark.

2

Pour, Float, Colour

The slab is poured and floated flat, then the release is broadcast across the surface ready for the mats.

3

Stamp on the Window

The mats go down in sequence while the slab is firm enough to hold texture and soft enough to take it, then the edges and corners are detailed by hand.

4

Wash, Cure and Seal

Loose release washed off once cured, joints cut, then sealed — the step that brings the colour up and keeps it there.